VF45 - VF45 MM Patch Cord:
The Volition VF-45 Socket and Patch Cords from 3M are the latest duplex, fiber optic interconnects for affordable, high bandwidth, fiber-to-the-desk networks. The VF-45 plug and socket work like an 8-pin modular jack, bringing the simplicity of the RJ-45 jack to optical fiber applications. VF-45 sockets can be field terminated in closet patch panels and in work area outlets for premises backbone and horizontal cabling applications. Field termination on duplex multimode and single-mode fiber using the Volition VF-45 Termination Kit takes less than two minutes, two fibers at a time! The mating VF-45 plugs, factory terminated onto patch cords, enables interconnection from socket-to-socket or from socket-to-transceiver devices. VF-45 patch cords are provided in a variety of lengths and are also available in hybrid ST* or SC configurations. All VF-45 patch cords are constructed with the innovative 3M "GGP" high-strength coated optical fiber, providing for durability and tight bend radius in deskcenter applications.
Application & Features:
► Features & Application:
► Plug-to-socket design (no adapter needed);
► High-density duplex interconnect;
► V-groove alignment with injection-molded parts;
► RJ-45 style latch;
► Socket, snap together assembly;
► Eliminates expensive ferrules, sleeves or precision components;
► Easy to install, lower labor costs;
► Dependable in under-desk applications.
Features:
► Low Insertion Loss;
► Good Repeatability;
► Good Changeability;
► Good Temperature Stabilization.
Technical Polarity:
Volition™ VF-45™ Patch Cords:
VF-45 Patch Cords are available in the following combinations:
VF-45 to VF-45
VF-45 to ST
VF-45 to SC:
Specifications for Volition VF-45 Patch Cords:
Material | Specification |
|
Single-mode |
Multimode |
|
Connector |
Engineering Thermoplastic UL-94 VO |
|
Boot |
Thermoplastic Elastomer |
|
Fiber |
9/125μm |
62.5μm or 50μm |
Specifications:
Volition VF-45 Patch Cords interconnected with Volition VF-45 Sockets perform to the following loss and reflection data and conform to the following combination of TIA, IEC and 3M performance specifications.
Specifications for Volition VF-45 Plug and Sockets:
Test | Test Conditions/Requirements |
|
Single-mode |
Multimode |
|
Attenuation |
≤0.75dB |
≤0.75dB |
Reflection |
≤26dB |
≤26dB |
Mating Durability |
500 Cycles, ≤0.75dB Max |
|
Strength of coupling |
33N, ≤0.75dB |
|
Plug Cable Retention |
Tensile load 66N,side pull 19.4N, ≤0.75dB |
Tensile load 66N,side pull 6.6N, ≤0.75dB |
Plug Flex |
100 cycles,±90 degree,0.5kg, ≤0.75dB |
|
Plug Twist |
10 cycles, ±2.5 Revolution, 15N, ≤0.75dB |
|
Cold |
-10℃(14˚F) for 96 hours, ≤0.3dB increase |
|
Heat |
60℃(140˚F) for 14 days, ≤0.3dB increase |
|
Humidity |
40℃, 95% relative humidity for 96 hours, ≤0.4dB |
|
Impact |
8 drops @ 1.8m, ≤0.75dB |
|
Thermal Cycling |
-10℃ 60℃(14˚F to 140˚F), 5 cycles, ≤0.3dB increase |
|
Vibration |
10 to 55 Hz, 30 min, each axis, ≤0.3dB increase |
Optical Properties:
Items | Unit |
Specification |
||
Cladding Non-Circularity |
% |
≤2.0 |
||
Coating Diameter |
μm |
245±10 |
||
Cladding-Coating Concentricity Error |
μm |
≤1.0 |
||
Core Diameter |
μm |
62.5±2.5 |
||
Cladding Diameter |
μm |
125±1.0 |
||
Cable Material | ||||
Outer sheath |
LSZH (Gray) |
|||
Outer sheath of single fiber |
LSZH (Gray) |
|||
Secondary sheath of single fiber |
Nylon TIGHT |
|||
Strength member |
Aramid yarns |
|||
Fiber Type |
MM‐62.5/125µm |
|||
Connector Type |
VF45 Plug - VF45 Plug |